抗滑短桩越顶问题的有限元验证

抗滑短桩是介于抗滑键与全长桩的一种特殊的抗滑桩,由于其较全长桩经济,已在实际工程中应用。云阳县太公沱至余家包库岸大咀段库岸因其下滑推力大、滑面埋深深,采用常规的抗滑桩极其不合理,通过方案比选此滑坡采用长12m的抗滑短桩进行支护。运用有限元强度折减法对设置抗滑短桩后,对滑面是否越过桩顶进行了验证。经计算设置抗滑短桩后滑坡稳定系数为1．25,说明滑坡采用抗滑短桩支护是可行的。     

拖缆系统回转运动仿真计算

用三因次拖缆系统动力平衡运动方程式 ,在时间和空间上作中心差分数值离散平衡方程式 ,编制了拖缆回转运动计算程序 .在拖缆尾端自由边界条件中 ,将尾绳阻力作为自由尾端点的张力 ,改善了因自由尾端张力为零引起的差分方程奇异性 ,使仿真计算更加稳定 .将阵形坐标值转换到拖点运动坐标系中 ,便于拖船观察回转机动中阵形的变化 .仿真计算了两个拖曳阵试验模型 ,仿真结果与试验比较吻合较好 .对实尺寸拖曳线列阵进行了仿真计算 ,讨论了拖点速度和回转半径对阵形影响     

Opportunistic retooling of a flexible machine subject to failure

A set of jobs can be processed without interruption by a flexible machine only if the set of tools required by all jobs can be loaded in the tool magazine. However, in practice the total number of tools required by a job set would exceed the tool magazine capacity. In such situations, the job set has to be carefully partitioned at the start of the production run such that each partition can be processed without interruption. During the production run, if there are unscheduled machine downtimes due to machine failure, this provides an additional opportunity to optimally retool the magazine for a smaller job set consisting of just the unprocessed jobs. In this paper, we study job sequencing rules that allow us to minimize the total expected cost of machine down time due to machine failures and magazine retooling, assuming a dynamic re‐sequencing of the unprocessed jobs after each machine failure. Using these rules, we develop a branch‐and‐bound heuristic that allows us to solve problems of reasonable size. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 79–97, 2001     

A computationally efficient approach for determining inventory levels in a capacitated multiechelon production‐distribution system

The system under study is a single item, two‐echelon production‐inventory system consisting of a capacitated production facility, a central warehouse, and M regional distribution centers that satisfy stochastic demand. Our objective is to determine a system base‐stock level which minimizes the long run average system cost per period. Central to the approach are (1) an inventory allocation model and associated convex cost function designed to allocate a given amount of system inventory across locations, and (2) a characterization of the amount of available system inventory using the inventory shortfall random variable. An exact model must consider the possibility that inventories may be imbalanced in a given period. By assuming inventory imbalances cannot occur, we develop an approximation model from which we obtain a lower bound on the per period expected cost. Through an extensive simulation study, we analyze the quality of our approximation, which on average performed within 0.50% of the lower bound. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 377–398, 2000     

Single machine sequencing with linear models of release dates

The paper deals with a problem of scheduling a set of jobs on a single machine. Before a job is released for processing, it must undergo some preprocessing treatment that consumes resources. It is assumed that the release date of a job is a linear decreasing continuous function of the amount of a locally and globally constrained, continuously divisible resource (e.g., energy, catalyzer, financial outlay, gas). The problem is to find a sequence of jobs and a resource allocation that will minimize the maximum job completion time. Such a problem appears, for example, in the ingot preheating and hot-rolling process in steel mills. It is shown that the problem is strongly NP-hard. Some polynomially solvable cases of the problem and approximate algorithms with both experimental and worst-case analysis are presented. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 99–113, 1998     

Arrival and departure state distributions in the general bulk‐service queue

In this paper, we give an explicit relation between steady‐state probability distributions of the buffer occupancy at customer entrance and departure epochs, for the classical single‐server system G/G^[N]/1 with batch services and for the finite capacity case. The method relies on level‐crossing arguments. For the particular case of Poisson input, we also express the loss probability in terms of state probabilities at departure epochs, yielding probabilities observed by arriving customers. This work provides the “bulk queue” version of a result established by Burke, who stated the equality between probabilities at arrival and departure epochs for systems with “unit jumps.” © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 107–118, 1999     

二层粘弹阻尼复合结构的优化设计

构造二节点八自由度有限元模型对二层粘弹弱约束阻尼复合结构的动力学特性进行了数值分析,其计算结果与实验结果基本一致.利用此有限元模型研究了各层阻尼材料的几何及物理参数对复合结构阻尼性能的影响.     

2种结构驱动线圈对电枢受力的影响

介绍了电磁同步线圈驱动器工作原理，并利用有限元分析软件ANSYS建立驱动线圈的三维模型。在不同结构的驱动线圈的驱动下，分别对电枢所受电磁力进行仿真，得到电枢在不同情况下的受力变化规律；在加载情况完全一致的情况下，对比不同结构的驱动线圈对电枢的作用力，得出2层驱动线圈对电枢综合作用效果较好的结论。     

模态综合法在求解自行火炮动态特性中的应用

运用自由界面模态综合法将自行地地分为炮身、摇架、高低机、平衡机、炮框、炮塔、车体等子结构.依据频率准则,由有限元法求得各个子结构的分支模态,由整体自由度缩减的动力方程求得全地的动态特性.运用该方法使整体动力方程的阶数大为降低,且保证了求解结果的精度.     

超精密金刚石车床伺服进给数学模型

首先分析了车床进给系统各环节的传递函数,在此基础上采用频域估计建模和时域建模方法建立了车床伺服进给系统的Ｓ域和Ｚ域模型